Search  for anything...
Milwaukee

MILWAUKEE ELECTRIC TOOL 49-22-8510 Milwaukee Kit Right Angle Attachment, 9.5" x 1.75" x 6"

  • Based on 1,562 reviews
Condition: New
Checking for the best price...
$63.95 Why this price?
Save $9.03 was $72.98

Buy Now, Pay Later

As low as $10.66 / mo
  • – 6-month term
  • – No impact on credit to apply
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout.

Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Free shipping on this product

This item is eligible for return within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: 12 left in stock
Fulfilled by BOXBUYER
Arrives Thursday, Apr 2
Order within 7 hours and 33 minutes
Available payment plans shown during checkout
Protection Plan Protect Your Purchase
Checking for protection plans...

Recently Viewed

Description

Milwaukee's Right Angle Attachment allows contractors to drive screws and drill holes in tight, difficult work areas. This attachment is ideal for cordless drills and uses standard 1/4- inch hex accessories. It has a durable all-metal housing and steel gears with ball bearing construction which allows this adapter to handle up to 235 in.-lbs. of torque. The compact design measures only 2 inches wide allowing it to fit in tight spaces where work is difficult to perform. The convenient quick change chuck accepts standard 1/4-inch hex drive accessories. Drilling holes and installing screws or bolts in an area too small for a conventional drill/driver can exhaust the patience of the most experienced contractor. When you get tired of using a stubby screwdriver you can either shell out the big bucks for a right angle drill or you can save your money and purchase Milwaukee’s right angle attachment. Milwaukee Tools, one of the most respected names in the tool industry, manufactures a 1/4-inch hex right angle attachment that is ideal for cordless drills up to and including the more powerful 18-volt models. The tool’s quick-change magnetic chuck accepts standard 1/4-inch hex drive accessories and the durable metal housing utilizes steel gears and ball bearing construction that gives the user a full 235-inch-pounds of torque. More than enough torque for driving screws or for drilling smaller holes. At only 2 inches wide, the tool will fit in very small and compact areas -- C. Dwight Barnett

Brand: Milwaukee


Power Source: Battery Powered


Maximum Rotational Speed: 1500 RPM


Voltage: 110


Amperage: 18 Amps


Is Discontinued By Manufacturer ‏ : ‎ No


Product Dimensions ‏ : ‎ 3.94 x 0.79 x 2.36 inches; 1.04 Pounds


Manufacturer recommended age ‏ : ‎ 3 years and up


Item model number ‏ : ‎ 49-22-8510


Department ‏ : ‎ Tools, Auto & Industrial


Batteries ‏ : ‎ Lithium Ion batteries required.


Date First Available ‏ : ‎ April 1, 2004


Manufacturer ‏ : ‎ Milwaukee


Best Sellers Rank: #197,396 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #26 in Power Right Angle Drills #20,437 in Power Tool Parts & Accessories


Power Source: Battery Powered


Maximum Rotational Speed: 1500 RPM


Voltage: 110


Amperage: 18 Amps


Maximum Chuck Size: 0.51 Inches


Additional Features: Compact


Maximum Torque: 1 Inch Pounds


Speed: 1200 RPM


Maximum Power: 800 Watts


Torque: 1 Inch Pounds


Drill Type: Combination Drill


Is Electric: Yes


Drilling Capacity Wood: 0.3 Inches


Drilling Capacity Metal: 0.25 Inches


Color: Silver


Material Type: Metal


EU Spare Part Availability Duration: 5 Years


Brand Name: Milwaukee


Included Components: Bare-Tool


Model Number: 49-22-8510


UPC: 045242183524 758710430180 740528466109 044904498365 018717217369 826659234838 602458863055 758353222821


Global Trade Identification Number: 24


Manufacturer: Milwaukee


Manufacturer Warranty Description: MFG Defects


Manufacturer Part Number: 49-22-8510


Unit Count: 1.0 Count


Item Type Name: Milwaukee 49-22-8510 Right Angle Drill Attachment Kit


Item Dimensions L x W x H: 10"L x 2"W x 6"H


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Thursday, Apr 2

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Small, but very sturdy all-metal construction, should last a long time
I like this right-angle attachment a lot, especially the sturdy metal construction and the small size. I use it with my cordless drill when there's not enough space to fit the drill + bit, then I come in from the side with this right-angle attachment. My Bosch 12-volt drill is rated at 265 inch-pounds of torque, and the Milwaukee attachment is rated at 235 inch-pounds, so they are pretty well matched. The product info sheet lists a few other limitations: - drives screws up to #8 x 3" - flat boring bits up to 1" dia [spade bits] - twist drills up to 1/8" [in my opinion, it will easily handle bigger drill bits - after all, they say it can handle a 1" spade bit!] - 1750 rpm max - not for impact drivers or corded power tools The chuck collar has to be pulled forward (outward) both to insert and remove hex bits. With my usual hex bit holder, I can push hex bits into the chuck without pulling the collar forward, but not with this chuck. Therefore you always need two hands at the chuck, inserting and removing bits, a minor inconvenience. If you are really tight on space, you can use the very short hex bits, the ones that are about 1" long. The total required space for the attachment + bit is then about 2-3/8", not including any extra space that the drill might need. The interior of the chuck is strongly magnetic, but only once the bit is fully inserted. When using the very short bits, there's very little of the bit sticking out of the chuck to grab on to. To break the considerable magnetic force, you might need to use pliers to grab short bits, but regular bits are easy to pull out by hand (once you pull out the chuck collar). The overall length of the attachment is 6-3/16", including the full length of the drive shaft. I have used this right-angle attachment to drill holes for electrical wires, using a 5/8" Irwin Speedbor, the kind with the lead screw and three spiral flutes. These drill bits need a lot of torque, and 5/8" is the biggest Speedbor that I can use with my cordless drill without overtaxing the drill. The Milwaukee right-angle attachment handled the torque just fine, although I was extra careful not to let the Speedbor bit bind in the hole, which can cause kickback and extra strain. Note that the attachment's drive shaft has two different diameters: The very end has a 1/4" hex shank, but farther up the shaft, it expands to 5/16" hex, which they say you can use for higher torque applications. The red handle is quite adjustable. By unscrewing the handle a few turns, you can pivot the handle from 0 to 90 degrees from the body of the attachment (in four steps), then tighten the handle to lock it in place. But you can also rotate the metal collar that the handle attaches to, so the handle can stick out of either side of the attachment body, or the top or bottom (there are 12 detents as you rotate the collar all the way around the attachment body). To rotate the collar, loosen the red handle, tilt it all the way towards the chuck end (past 90 degrees, which unlocks the rotating collar), then twist the handle/collar assembly around the body of the attachment. Once you tilt the handle back, it locks the collar, then you tighten the handle itself. One other unobvious feature: There is a small hole in the body of the attachment, at the chuck end, that the instructions say is a lubrication port, for light oil or lithium grease. It's not clear how to use this port, because there is no fitting, just a small hole. The product package says the attachment is made in Taiwan. Although it's pricey, the Milwaukee right-angle attachment is very well made. Overall, I like it a lot, and would recommend it. ... show more
Reviewed in the United States on January 19, 2015 by johnsantic
    • I hope this will clear up some confusion.
This is one handy tool to have in your tool arsenal . You never know when you need to get into a tight space. It sure beats using a stubby screwdriver or a 1/4" socket wrench. This is a very well built attachment. I own the Milwaukee off-set screwdriver power head (48-32-2100) that is a little smaller and now the heavy duty right angle attachment (49-22-8510). Both are outstanding tools and perform better then stated. The heavy duty right angle attachment is rated for 235 in. of torque. This is almost full torque on a Milwaukee 3/8" drive, 12V cordless drill and half torque on the Milwaukee 1/2" drive, 18V cordless drill when using low speed on the drills. One needs to remember that these drill attachments are 1/4" hex drives. If you are looking for serious torque, look into purchasing a 3/8" or 1/2" right angle drill. I hope this will clear up some confusion with the reviewers that stated the bits do not stay in the chuck. You might want to go over the instructions to see what you are doing wrong or you are not using 1/4" hex quick release shank bits. The right angle attachment does have a quick release magnetic chuck. When the bit is installed correctly, you can not even pull it out without releasing it with the quick release chuck collar. I have a Craftsman Speed-Lok Drill and Drive set that works perfectly with this, along with the bits that came with it. Here is a quote from the Milwaukee "Inserting Bit Instructions". 1. Pull out the chuck collar. 2. Insert the bit shank all the way into the chuck. (the magnet will help pull it in) 3. Release the chuck collar. 4. Pull on the bit to make sure it is secure. Update 9/11/2017 Just a commit on the guilty of this attachment. I purchased this in 2006 and have used it routinely since. It still works as it has from day one without any problems. When using it just remember to keep the torque spec in mind and you should have trouble free operation. ... show more
Reviewed in the United States on October 18, 2006 by DAC
    • The Best Angle Drill Attachment Money Can Buy
If you are considering trying to drill in a tight area, or inside a wall, do not consider buying any other right angle drill attachment than this one. I'm a professional TV Installer and this is the most important drilling tool in my arsenal. I have killed probably 10 or more other brands/types of right angle drills and drill bit attachments, they always end up breaking. The chuck slides down, you slide in a hex drill bit, and lock it back in place, nice and smooth, and holds on to the bit well. I've been using this Milwaukee now for about four months with no signs of it breaking down. It's extremely well built. I use it typically with a cordless 18V drill set on the lower RPM setting, and Bosch Daredevil paddle bits (another best in class, check out those bits here for blasting through studs). http://www.amazon.com/Bosch-Daredevil-DSB5013P-13-Piece-Spade/dp/B002GU6QAA/ref=sr_1_1?ie=UTF8&qid=1362513836&sr=8-1&keywords=bosch+daredevil This is small enough to fit into a single gang hole, and you can loosen the red handle to allow you to rotate the entire head of the right angle attachment to the angle you need, then screw down the red handle to lock in place. We've put this thing through the ringer and it has not died on us yet. We're typically using it to drill through a stud inside a wall with a paddle bit, fitting it through a single gang hole, and then getting right, left, up or down in a tight space. For anybody that has tried this you know how hard it is, and how demanding on the tool and bit it can be. You've probably also tried a similar tool or attachment and my guess is it eventually died. Spend the extra few dollars for this attachment and you will not regret it. ... show more
Reviewed in the United States on March 5, 2013 by Ryan M. Patterson

Can't find a product?

Find it on Amazon first, then paste the link below.
Checking for best price...